Obtaining Shop User Privileges

Before starting any work in the machine shop users must complete the following (1-6):

  1. Register at the bottom of this page with your signature and submit emergency contact information as prompted.

  2. Read all shop and safety policies and sign them electronically.

  3. Watch and obey the following safety YouTube videos:

    General Shop Safety: https://www.youtube.com/watch?v=BD_tPe-dHEk
    Lathe Safety https://www.youtube.com/watch?v=9NTH6xp-Pl4
    Mill Safety https://www.youtube.com/watch?v=iTk6SDZ-rBw
    Welding Shop Safety https://www.youtube.com/watch?v=tI7Onbq-MBg
  4. Capstone students must attend machining and safety refresher sessions held during your ETME 499 lecture time. The ETME 499 course instructor will provide the specific dates for those sessions. All other students must schedule a machining and safety training with the machine shop supervisor. (Not required for Fall 2020! Instead, students will receive safety instructions while they are working in the shop.)
  5. Complete and pass a quiz about proper machining and safe working practices.
  6. Obtain a valid MSU CatCard or Drivers License to be presented while checking in for shop usage hours. The MSU CatCard will be needed to access the facilties after regular busines hours. 

Machine and Shop Time Reservations

Machines and tools are typically assigned on a first-come-first served basis. However, reservations can be made through the M&IE Machine Shop webpage in the Reservations section. Students, who cannot make their scheduled reservation should cancel it as soon as possible. Reservations will be voided for students, who do not show up within 15 min. of their scheduled time.

Shop User Sign-In Protocol

Every student, who is entering the facilities for open shop hours will have to check-in with a supervising GTA or the shop supervisor. At check-in, students may be asked to identify themselves through their MSU CatCard or Drivers License. For safety reasons, students are not allowed to work unsupervised or alone in the shop at any time!

Shop User Sign-Out Protocol

By the end of each working session, machines, tool carts and tools must be returned in a clean, functional and safe condition before students can check-out with the supervising GTA or shop manager. Not checking-out with a supervisor or leaving the works pace, equipment or tolls in an unsafe, non-functional, disorderly or dirty condition will result in loss of shop privileges. 

Use of CNC Equipment

The above user shop authorizations do not include use of any CNC equipment. For use of CNC equipment please follow the procedure outlined in the CNC Policy section of this web-page.

MIG and TIG Welding, Grinding

The NAH 185 laboratory are not equipped for welding and grinding operations. The welding facilities in Barnh 132 need to be used. Please make arrangements to have a welding supervisor present when working in Barnh 132. 

The use of hand-held angle grinders is not permitted in NAH 185. Angle grinding needs to be performed in the grinding booth in Barnh 132.

3D Printing of ABS and PLA

Students who require parts manufacturing by means of 3D printing shall submitt their part designs to the shop supervisor in native CAD file format either by e-mail or on a memory stick. The shop supervisor will review the design for eligibility and check if it is compatible with our 3D printer capabilities.  A design is eligible for 3D printing if it demonstrates either a decent level of multi-functional integration, or if it would be too difficult or cost prohibitive to manufacture by other means.

M&IE Shop Open Hours

The open shop hours are advertised in the Facilities Hours section of this web-page.

E-Signature this document

I acknowledge by my signature below to have watched the M&IE Shop Safety Videos and  have read and understood the above policy. I agree to operate only the equipment for which I have obtained operation instructions, and to abide by all safety rules, procedures, and best-practices for working in the laboratories.

Net Id
Password
Signature
Email
Phone No.

Emergency Contact Info:

Last Name
First Name
Phone No.

Check completed pre-requisites:

ETME 216/217

ETME 310

ETME 311